A wood lathe machine is nothing without its accessories. For creating different geometric shapes, wood lathe accessories are a must-have tool for a woodworker. If you are searching for the best and perfect wood lathe tool, you are in the right place. After examining for more than 110 hours, investigating the top 25 accessories, and Things we don’t like with 5 experts, we have listed seven lathe accessories for you. Keep reading for further information.
CSC3500SE Wood Lathe Chuck (Ultra Essentials Bundle)
CSC3500SE Wood lathe chuck is a product of Penn State Industries. You will get a sturdy grip while attaching it to your wood lathe machine. With its high performance, it is effortless to use. Thus you can make beautiful, eye-catching designs in wood. This wood lathe chuck is operated with a self-centering four-jaw Barracuda2 wood lathe chuck system. CSC3500SE chuck can work by several mini, midi, or full-sized lathe.
What includes in CSC3500SE Wood Lathe Chuck?
- 2″ Round jaws
- Step jaws
- Pen blank drilling jaws
- Screw Chuck
- Jaw tightening key
- Allen Wrench
- Jaw Screws (16)
- Sturdy storage/carrying case.
The body of the chuck is pre-threaded to 1″x8tpi and weighs about four lbs and measures 3-1/2″ in diameter. It can give you most turning projects onto your lathe and provide bowls, pens, spindles, and other small turning projects. You may don’t know this product is 43th best seller in Lathe Chucks and 186th best seller in Power Lathe Accessories. Moreover, it’s compatible with all supplementary C-Series jaws and accessories. Do you want to know them? Well, they are-
- 7-3/4″ Jumbo flat jaws (CJAWFJ2)
- 5″ Small flat jaws (CJAWFJ1)
- 3 Round jaws (CJAW3)
- Pin jaws (CJAWPIN)
- 2 set of Alligator Jaws (LCALJAWS), and more
The Bottom Line
It’s a compact package for the woodworkers. If you avoid the weight, you will get lots of positive points like fewer efforts to work and essential staff. You won’t get disappointed.
Nova Precision Midi 48111 1″ 8-TPI Direct Thread Chuck
It is the smallest chuck in Nova Lathe which is ideal for up to a 12″ swing lathe over the bed. Being small in size, it can minimize the load of small spindles and bearings. Furthermore, you will be satisfied with its extremely accurate performance. Also, it is built like SuperNova2, and Titan Chucks with the same exacting standards. It can accept the accessories and jaws of other Nova chucks. With the quick two-handled operation it is ideal for fast production of smaller pieces.
It is recommended for power work which is holding on lathes up to 300mm/12″ diameter swing. Body size of Nova Precision Midi 48111 is 85mm/3.35″ and cannot be used with adapters or inserts. However, it can make up to 350mm/14″ diameter bowls by using 50mm/2″ jaws and up to 50mm/2″ length spigots by using 50mm/2″ jaws. Even after having all the tools, a full package of this chuck weighs only 3 lbs so; it minimizes the load on small spindles and bearings.
There is a 2-lever operation that offers swift action and it’s ideal for small pieces production. Though the chuck can take all Nova jaws, it’s not recommended to work with the larger attachment and jaws in the Nova line. It looks like silver, even after using steel, to build. The power source is corded-electric. And, you will get two years of manufacturing warranty.
What includes in Nova Precision Midi 48111 1″ 8-TPI Direct Thread Chuck?
- 1″ 8-TPI Direct Thread Chuck of Nova
- 50mm/2″ Jaws
- Safe Lock™ Woodworm Screw
- Instruction manual
- 2 Levers
The Bottom Line
If you are searching for a small chuck, this one is a good option for you. Also, you will get some staff which includes the package. Besides that, the fascinating 2-lever operation and all accessories acceptance will help you in the long run.
NOVA 48232 G3 Wood Turning Lathe Chuck
Nova 48232 has an anti-release spindle lock that ensures the chuck will stay securely mounted on the lathe during forward and reverse turning. Also, the locking set screw is very helpful for the woodworkers. This particular model owns a dovetail external grip which means the user can operate it very well. It comes with a locking set screw that offers woodworkers to use the reverse mode. Though it’s only dedicated to fit 1″ x 8tpi lathe spindles, it accepts a full range of NOVA chuck accessories.
The chuck is easy to clean, and you can open the backside of this chuck. You will find fast; comfortable T Bar handles to operate it. Still, do you want to know what we love the most about this product? Well, undoubtedly its compact configuration and simplified maintenance. The power source of the tool is corded-electric so, no need for batteries. The most surprising information we got here is this lathe chuck has a 6-year full replacement warranty.
What includes in NOVA 48232 G3 Wood Turning Lathe Chuck?
- G3 Chuck
- 50mm Jaws
- Woodworm Screw
- T-bar Handle
- Instructions manual
It weighs under four pounds (3.92) which means it is not the heaviest tool around the market. This advantage will help you to works hours on end outwardly getting fatigued.
The Bottom Line
Easy cleaning, anti-release spindle lock, reverse mode, and 6-year full replacement warranty makes this lathe chuck unbeatable. We can bet you will enjoy working with this Nova product.
PSI Woodworking CUG3418CC Lathe Chuck
Our fourth wood lathe accessory is PSI Woodworking CUG3418CC Lathe Chuck. It’s heavy-duty chrome-plated and a self-centering chuck which will help you to hold your object tightly and keep it securely on midi. This type of full-size woodworking lathes Chuck is pre-threaded to 1″ x 8tpi.
We are confident that this lathe chuck will surprise you with its sturdy grip and smooth action. It features a wide range of accessories including four sets of jaws and will fix any project onto your lathe. Though it weighs near 5 lbs, this chuck is ideal for making small projects, spindles, and bowls. Moreover, It is a C series chuck that works efficiently with all “C” series jaws. The power source of this chuck is corded so you won’t need batteries. Are you now thinking about the warranty? Well, PSI Woodworking will give you a 2-Year warranty for manufacturer defects.
What includes in PSI Woodworking CUG3418CC Lathe Chuck?
- 3/4″ x 16 TPI Adaptor
- External 3/32″ to 1-7/8″ Step Jaws
- Internal 11/32″ to 3-3/8″ Step Jaws
- External 1-1/2″ to 3-1/8″ Round Jaws
- Internal 2″ to 3-7/8″ Round Jaws
- Allen Wrench
- 2 Tightening Levers
- Manual Instructions
The Bottom Line
This chuck is at 15 in the bestselling of Power Lathe Accessories, and we have found numerous positive customer reviews about it. Also, there is a good discount on amazon.com. Based on all these factors, we can say you will love it while using it.
Nova SuperNova2 23055 Wood Turning Chuck (Insert Type)
SuperNova2 23055 is another lathe chuck that is suitable for lathes with up to 20″ swing. It can deliver incredibly smooth, vibration-free performance for the powerful patented Tuff Lock gearing. It comes with composite indexing back, auto-stop option, copper composite jaw slides, woodworm screw, comfortable T bar handle, and 2″ standard Jaws. Moreover, you can turn it longer with more delicate stems. Uneven and rough work can be handled precisely. This chuck can accept all Nova attachments and jaws like the other lathe chucks. One important thing you should keep in mind that, for being an insert type chuck, it requires an additional insert adapter to fit with the lathe machine. The SuperNOVA2 23055 comes with an M33 Direct Thread for European lathe machines.
We have got maximum holding power and strength while using this chuck because it’s made from medium tensile carbon K145 steel and it is harder than mild steel. Also, it comes with the best mechanical properties which prevent bending and stretching. Nova Jaw Slides are popular for their self-lubricating properties that ensure efficiency. It has a fully sealed backing plate that protects gears from dust, and it’s made from ultra-tough Duracon 25 composite, reinforced with stranded glass fiber for extremely long life in harsh conditions. After having all these features, it weighs 5.1 pounds and needs a corded-electric power source. NOVA is providing a 2-year replacement warranty to their SuperNOVA2 23055 customer.
What includes in SuperNova2 23055 Wood Turning Chuck?
- 2 inch Jaws
- T-Bar Handle
- Woodworm Screw
The Bottom Line
This stunning lathe chuck can satisfy you with its precision work. And you don’t need to be worried about its long life because of the ultra-tough Duracon 25 composite.
NOVA 23245 Chuck with Most Popular Jaw Accessory Bundle
It is a versatile and popular SuperNOVA2 chuck, and it has the most popular accessory add-ons for most woodturning designs. The bundle contains:
- 23055 SuperNOVA2 Chuck
- JS25N NOVA 25mm/1″ Accessory Jaw
- JS100N NOVA 100mm/4″ Accessory Jaw
- The JSCOLE, NOVA Cole Accessory Jaw
- Cole Jaw Fastenings
- Chuck Fastenings
- Woodworm Screw
- T Bar Handle
- Instruction Manual
- Storage Tray
If you are a professional lathe user, you may know that these are the best NOVA chuck and NOVA is on the top for chuck accessory selling. All can be fitted to your NOVA chuck with the fasteners that come with the chuck. It comes with the NOVA Cole Accessory Jaw Set which is an accessory for NOVA Chucks. This accessory jaw set is designed to expand the range and capacity of the standard NOVA chuck for some special projects and applications. It has the advantage of universally fitting to any NOVA chuck for maximum interchangeability. There is an expanded dovetail facility for mounting bowls or platters and reverse dovetail for mounting footed bowls or platters.
Four jaw parts
For turning small bowls and unsupported small spigot, the NOVA JS25N 25mm Accessory Chuck Jaw set can help you till the end. Actually, this jaw set is ideal for midi/mini-lathe work with a unique NOVA woodturning dovetail profile; this is explicitly designed for excellent strength and holding in woodturning which won’t crush the wood fibers. So, it can hold in both contraction and expansion mode. It is precisely built from a single solid piece of 1045 high tensile steel that makes it durable and gives long life. Also, this jaw set comes with four jaw parts and instructions.
The NOVA 100MM (4″) is one of our most popular chuck accessories to fix 12-14″ bowls. These chuck accessories are built with a turning dovetail profile for maximum strength without venturing wood fibers and can hold both during contraction and expansion modes. JS100N is built from high tensile 1045 steel for precise closing, durability, and long life. It featured four jaw parts and instructions. Moreover, it uses the standard fasteners that come with the NOVA Chuck, and the power source of this chuck is corded-electric.
There is safety advice for NOVA 23245 Chuck users. Always use only authentic NOVA accessories on the NOVA chuck. Using non genuine NOVA and copies of attachments could lead to operation and safety issues. NOVA accessories are only designed for use on NOVA Chucks. Don’t use it on any other chuck.
After spending a lot of time and experiencing this chuck many times, we can say that it’s a beautiful lathe accessory which is very useful in various sectors. Moreover, it offers a wide range of additional accessories which will help the woodworker in the long run.
FAQs about Wood Lathe Accessories
Do NOVA chucks have a thread?
No, they don’t come with a standard thread. You will need to buy an adapter to fit your specific utilization because it’s not included.
Is the chuck reversible for sanding?
The chuck has a locking screw on the insert so the chuck can run in reverse without unscrewing.
Is it needed to spend more money on an insert?
Yes, you will be needed to purchase separately.
Generally, which type of workpiece is held in chucks?
In a lathe, a chuck is one of the essential devices for holding and rotating a workpiece. Generally, the short length and large diameter workpieces are held in chucks.
Do the majority of three-jaw chucks have three sets of jaws?
Which type of diameters do three-jaw chucks hold?
It can hold both internal and external diameters.
Which type of work, does the scroll perform in three-jaw chuck?
The scroll clamps the components in place and locates it.
Can two jaw chucks be used as a turning mixture?
Yes, it can.
Having the perfect wood lathe accessories is mandatory for a wood lathe machine. Our listed lathe attachments are fitted with most of the lathe machine. For precise and unique work choose any one of them. If you have any questions or confusion, please let us know in the comment section below. We will answer in the meantime.