5 Best Miter Saw For Crown Molding in [2023]

There is no better tool out there that you can use to make crown moldings than the best Miter saw for crown molding. Installing crown molding is a tricky task. And making crown molding is even more challenging. Especially if you are not working with the right tools, the job will become more difficult. Many things need to be taken care of to make crown molding.

For instance, you need to carefully cut the right angles to create a flawless joint that looks just perfect. This is a skill that takes time to master. But using the right tool for the job helps you in moving forward in the right direction. The perfect tool for this is the best miter saw for crown molding.

There are a lot of things that you can do with a miter saw, but one thing that stands out the most is the beveling. You can also use miter saws to make cross-cuts, making them a go-to tool for the folks who make crown moldings. If you are interested in getting one for yourself, you should look at the following best miter saw for crown molding that we’ve picked for you.

List of 5 Best Miter Saw For Crown Molding

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)	Best high power Miter saw for crown molding		Check Amazon Price Check Walmart Price
Metabo HPT 10-Inch Compound Miter Saw, Single Bevel	Best compound Miter saw for crown molding with single bevel		Check Amazon Price Check Walmart Price
Makita 10″ Compound Miter Saw	Best compound Miter saw for crown molding		Check Amazon Price Check Walmart Price
Compound Miter Saw, TACKLIFE 10-Inch Double Sliding Miter Saw	Best Miter saw for crown molding with double sliding		Check Amazon Price Check Walmart Price
WEN MM1011 15-Amp 12″ Single Bevel Compact Sliding Compound Miter Saw with Laser	Best Miter saw for crown molding with laser		Check Amazon Price Check Walmart Price

Top Product Comparison Chart:

Product’s Name	Amperage	Type of Style	Weight	Speed
DEWALT 12-Inch Miter Saw, 15-Amp	15 AMP	Corded electric	42.8 Pounds	4000RPM
Metabo HPT 10-Inch Compound Miter Saw	15 AMP	Electric powered	24.5 Pounds	5000RPM
Makita 10″ Compound Miter Saw	15 AMP	Corded electric	27.3 Lbs	4600RPM
TACKLIFE 12-Inch Double Sliding Miter Saw-	15 AMP	Corded Electric	53 Pounds	3800 RPM
WEN MM1011 15-Amp 12″ Single Bevel Compact Sliding Compound Miter Saw	15 AMP	Electric Miter saw	37.8 Pounds	4500 RPM

Quick information about this product

• Manufacturer By: Dewalt
• Country of Origin: Taiwan
• Dimensions/Weight: ‎26.77 x 21.85 x 18.9 inches/‎42.8 pounds
• Type of Style: ‎12″ Single Bevel Miter Saw
• Speed: ‎4000 RPM
• Warranty:‎ Three-Year Limited Warranty

Technical details

The Miter saw comes with a left-side slope and a minor right side to make the angle cuts. There is no saw sliding option included in this particular product. So it won’t be able to make the cross-cut bigger than the size of its saw. This Dewalt Miter Saw can speed up to about 4000 RPM, which is fast like really fast. The size of the blade is 12 inches.

This Dewalt saw is a corded electric device. It uses about 15-Amp of power to operate. The weight of the Miter saw is 42.8 pounds.

Benefits

The beveling trigger is on the saw, and there are more than three positive stops at common angles, which will save you time. This saw comes with tall slides that keep the wood in place and you can do work peacefully.

 Features

• This saw features a single beveling system, and this thing can go down left up to a 48-degree angle.
• There are more than three positive positions while beveling to save your precious time.
• The speed of the saw can go up to 4000 RPM.
• This saw can cross-cutting 2×8 lumber at 90 degrees, and at 45-degree it can slice 2×6 lumber.
• There are high slides to keep your piece of wood in the right place.
• There is a metal fence that allows you to place the wood at exactly 90 degrees to the saw.

---

Quick information about this product

• Manufacturer By: ‎Koki Holdings America, Ltd
• Country of Origin: China
• Dimensions/Weight: ‎20.2 x 15.5 x 14 inches/‎24.5 pounds
• Type of Style: ‎Metabo HPT C10FCGS Miter Saw
• Speed: ‎5000 RPM
• Warranty:‎ ‎5 Year

Technical details

This Miter saw is electric power, and it is corded. It has a powerful motor of 15-Amp. The Metabo HPT Miter saw weighs about 24 pounds, and it can speed up to 5000 RPM. There is a 10-inch blade mounted on the saw.

Benefits

The Miter saw allows high Miter and bevel angles. The table of the saw is quite large and provides you with extra space to work. It covers the blade with a semi-transparent cover which provides safety for the hands. For precision, this saw comes with bevel stops. When it comes to user safety, the manufacturers have not made any compromises at all. The operating handle is on the side of the saw for safe operation.

Features

• The Metabo HPT miter saw comes with a 10-inch saw.
• This Miter saw has a single bevel system which allows it to make bevels up to 45 degrees.
• This product weighs about 24.2 pounds which makes it easy to maneuver around.
• The angels are mentioned on the saw to make precise cuts.
• There are positive steps that the thumb can reach for setting angles quickly.
• The Miter angle can also reach from 0-degree to 52 degrees.
• The blade speed of the saw is 5000 RPM.

---

Quick information about this product

• Manufacturer By: Makita
• Country of Origin: China
• Dimensions/Weight: ‎20 x 10 x 21 inches/‎33.8 pounds
• Type of Style: ‎Without Laser
• Speed: ‎4600 RPM
• Warranty:‎ 1 Year-30 Day Warranty

Technical details

This is a lightweight Miter saw weighing only 27.3 pounds. The product is compact, and its dimensions are 20 x 10 x 21 inches. The product is electrical and uses a cord to connect to the power source. The size of the blade is 10 inches. The motor it uses is a 15 AMP direct drive one.

There is also a shaft lock that ensures easy blade changing. Some accessories come along with the saw to help you in the molding process. The saw has 9 favorable positions for angle adjustment.

Benefits

You can make the cross-cuts in both rights and left directions, and it can bevel to the left side. There is no sliding saw option, so you have limited space to work. The saw table is solid, and there are slides on the side to keep the material you can cut in the right place. The machine’s weight is just 27.3 pounds so you can maneuver it around with much effort.

Features

•  This Miter saw is powerful, and the blade rotation speed can go up to 4600 RPM.
• It uses a shaft lock to ensure safe blade changing.
• This machine features a table made up of solid metal which means that it will be durable and will last.
• The saw can bevel from 0-45 degrees and allows you to make bevels.
• There are positive positions at the standard angles to save time.
• The cross-cut capacity to the right is 52-degree, and to the left, it can make up to 48-degrees.
• There are slide rails to keep the material in place.

---

Quick information about this product

• Manufacturer By: Evolution Power Tools
• Country of Origin: USA
• Dimensions/Weight: 18 x 17.2 x 12 inches/19.6 Pounds
• Blade Length: 4 Inches
• Voltage: 120 volts
• Warranty:‎ 3 Year Limited Warranty, 3 Year Limited Manufacturers Warranty

Technical Details

This is a compound Miter saw which comes with a 10-inch blade. It is an electric and corded Miter saw. There is a 15 Amp motor that is capable of rotating the blade to almost 3800 RPM.  A dust collection system collects almost two-thirds of the total dust produced during the operation—the dusk collection you can also increase by connecting a vacuum to the machine. The worktable of this Miter saw is very wide and provides a lot of space to work. It comes with a clamping system that provides extra safety while cutting.

Benefits

There is also an option to slide the saw to make longer cuts. So if you want to work with wider pieces of material that generally you can not cut with a fixed saw, this product is best for you. This saw comes with a laser guide which allows you to make cuts with great accuracy. A base handle can change the angle of cutting

Features

• The most impressive feature of this Miter saw is its double bevel-cutting feature.
• The saw of this product can slide horizontally, which means that you can make longer cuts.
• The 10-inch blade cuts smoothly and powerfully.
• For longer cuts, this thing has a laser guide.
• To keep the workspace clean, a dust collection system pre-installed can collect almost 70% of the dust produced during work.
• There is a transparent protective cover on the blade for safe operation.
• You can connect it to a vacuum via a vacuum port available on the Miter saw.

---

Quick information about this product

• Manufacturer By: WEN
• Country of Origin: China
• Dimensions/Weight: ‎37 x 21 x 20 inches/‎65.9 pounds
• Blade Length: 12 Inches
• Speed: ‎3800 RPM
• Warranty:‎ 5-Year Warranty

If you are looking for something with a more extended cutting range, you should look at this product. This specific product comes in black and orange colors. It is capable of making cuts to the left and right. This unit provides only left-side bevel cutting. The blade has a carbide tip for extra strength and durability.

Technical details

This saw has a single-bevel design. It is electric and corded. This thing weighs almost 37 pounds. It uses a 15-Amp motor to rotate a 12-inch blade at a speed of 4500 RPM.  There is an onboard level II laser that guides and illuminates the area of cutting. And to keep the air dust-free, it comes with a pre-installed dust bag. The side rails are there to keep the material in place while being cut. And they also make sure that you don’t get any angle wrong,

Benefits

The saw has an excellent reach of up to 12 inches, and it can cut through 3-½ -inches, thick boards. Over the worktable, you get a clamp assembly for safe operation.

Features

• The first feature that is worth mentioning here is the speed of the blade that this unit provides. It can rotate the blade up to 4500 RPM.
• It has a single bevel system, and the saw tilts to an angle of 45 degrees to the left.
•  The blade has a carbide tip, and it can cut through some of the woods’ toughest.
• Two table extensions come alongside the unit to give some extra space to play around.
• A dust bag is fitted on the unit to capture the dust during the operation.
• A laser guide is mounted in the unit to guide during the extended cuts.

Editor’s Experience

If you are looking for an efficient miter saw for crown molding then these five saws will make your work easy and perfect. It has extreme features and quality equipment that your money is worth it. Attractive looks and eye-catching design.

DEWALT 12-Inch Miter Saw: This saw was dead accurate out of the box. I use it for cabinetry and finish trim. I am really enjoying the depth and length of cut I get out of this saw. The included blade is probably fine for general carpentry and will give you useful life if not abused.

Metabo HPT 10-Inch Compound Miter Saw: This little saw is worth its weight in gold. I thought I made a mistake buying a smaller saw for the projects I was taking on, but, it did much more than I anticipated. I used a Dewalt table saw as well as this saw to complete a full built-in closet. I didn’t have to adjust much out of the box.

Makita 10″ Compound Miter Saw: It worked well with pressure-treated lumber as well as PVC. I really love this saw and plan to use it extensively to help maintain our hundred-year-old house. Amazon lists it as made in the USA. I did not believe that and sure enough, it was made in China.

Compound Miter Saw, TACKLIFE 10-Inch Double Sliding Miter Saw: Nicely designed, well constructed, beautifully finished. Has all the features you can think of on a miter/bevel saw. Came out of the box with the fence and bevel stop set for square cuts. The slide mechanism is smooth and without any free play.

WEN MM1214 15-Amp 12″ Dual-Bevel Sliding Compound Miter Saw with Laser: I mostly bought this unit on price, but once I started using it, I was really impressed with the quality and functionality for the money! Not having a large space to house it, I needed to have it mobile, so I found the plans for a mobile stand, and I used the saw to help build its stand! First time I had ever “built” a piece of furniture!

Buying guide

There are many tools to make crown moldings. You can use hundreds of different techniques while making the moldings. And cutting them is not different. One of the most efficient ways to cut the crown moldings is by using a Miter saw.

So if you want to work efficiently and save time you should also use a Miter saw. But before you go further to get one for yourself, you should take a tour of our buying guide that will ultimately help you choose the best Miter saw for crown molding.

Types of a Miter saw

A Miter saw that can cross-cut and make bevels at the same time is called a compound Miter saw. Depending upon the style, these compound Miter saws can be divided into the following three categories.

Single bevel Miter saw

A single bevel Miter saw is the one that comes with an option to bevel only to the left. It can make cross-cuts to either side, but it is limited to a single side when making bevels. A single beveling Miter saw is usually cheaper than the double beveling ones

Double bevel Miter saw

A double-beveling miter saw is one that can make a bevel to both sides. This saw comes in very handy, especially when working with crown moldings.

Sliding Miter saw

A sliding compound Miter saw is one that comes with a saw that can reach further than a fixed saw. The unit which comes with a sliding saw can have a single bevel and a double bevel system. This type of product is best for people who work with wider boards.

The features of a Miter saw.

Once you have finalized the category of the Miter saw you want, the next thing you should be looking at is the features. The beveling, cross-cutting, and sliding saw are the three main features, and these are discussed above.

Power of the motor and speed of the blade

The power of the motor and the speed of the blade are directly linked together. If a saw has a powerful motor, it will rotate the blade faster. An engine with a power of 15 amps is ideal for a Miter saw, and the rotation speed of the blade can range from 3600 to 5000 RPM.

Positive stops

Positive steps you can use to set the most common angles easily. These stops are super helpful in speeding up the work and also to set precise angles. Not all the Miter saws have positive stops, so if a Miter saw has some, that is a plus.

 Size of the blade

The most commonly used blade sizes are 8, 10, and 12 inches for a Miter saw. The choice of blade size depends upon your work. If you work with thick boards, you should have a bigger blade, and if not, then a 10-inch or 8-inch one will work for you.

Laser guide

The last feature we are going to talk about is the laser guide. It is not compulsory with every unit, but the Miter saw that a sliding option should have a laser guide mounted. It helps in making the long cuts precisely.

Table extenders and slide rails.

This is an extra feature that comes with a double-bevel Miter saw. It helps hold the long pieces of material on board and gives you some extra space to work. And the slide rails are

used to keep the material being cut perpendicular to the saw.

Dust Bags and vacuum port

Almost all the Miter saws come with pre-installed dust bags to hold the dust produced during the cutting. And the vacuum ports you can use to connect the unit with an external vacuum will deliver ideal results for you.

Safety

Just like any other power tool working with a Miter saw requires proper safety precautions. So we recommend buying safety glasses alongside your unit. Some of the products given in the list come with an optional pair of glasses. So you should buy one if you don’t have one already.

FAQs

What is the best Miter saw for crown molding?

DWS 715 from Dewalt is the best Miter saw for crown molding. What makes it best? It is a compound Miter saw which is designed to make cross-cuts and bevels. You get to choose from three different options available. A single bevel fixed saw one, a double bevel fixed saw one, and a dual bevel sliding option.

So it provides almost all the necessary options that you need during the making of crown moldings. There are plenty of more convenience and safety features in the tool, like positive positions for setting angles quickly and a covered saw for enhanced user safety. However, if you are looking for the best in the business, this is the one.

Can you cut crown molding with a single bevel Miter saw?

Yes, a single bevel Miter saw you can use to cut the crown molding. There are hundreds of different techniques that you can use to trim the crown moldings. But all of them provide the same final product. And a single bevel Miter saw allows you to work with almost all the necessary angles to make crown moldings.

Is a sliding Miter saw worth it?

The answer to this question depends upon your personal needs. To answer it correctly, we’ll assume two different scenarios. In the first scenario, you only work with the crown moldings that are no bigger than 10 inches then the sliding saw is worthless for you. But if you work with material broader than that, you should invest in a sliding Miter saw.

Can I use a 7-inch blade on a 10-inch Miter saw?

Yes, you can use a 7-inch blade in a 10-inch Miter saw. But using a 7-inch blade won’t be very efficient because the saw won’t get lower enough to cut through the wood completely. There are saw adjustment options available on many units. So it depends. If you are curious and want to use one, you can experiment on your own. And it might work for you.

What size Miter saw do I need for crown molding?

The most common sizes used for crown molding are 8-inch, 10-inch, and 12-inch Miter saw. Using a specific one depends upon your own needs. We recommend going for the 12-inch one because that will give you the most cross-cutting capacity while cutting the moldings.

Conclusion

When buying a product with many features, there is always a chance of going for the most hi-tech one. But the most important thing to realize is what you need. So in this post, we’ve tried to help you get the best Miter saw for crown molding that would also fit according to your needs, so you don’t have to spend extra for something you are not going to use.