Best Miter Saw For Crown Molding

Installing crown molding is a tricky task. And making crown molding is even more challenging. Especially if you are not working with the right tools, the job will become more difficult. Many things need to be taken care of to make crown molding.

For instance, you need to carefully cut the right angles to create a flawless joint that looks just perfect. This is a skill that takes time to master. But using the right tool for the job helps you in moving forward in the right direction. The perfect tool for this is the best miter saw for crown molding.

There are a lot of things that you can do with a miter saw, but one thing that stands out the most is the beveling. You can also use miter saws to make cross-cuts, making them a go-to tool for the folks who make crown moldings. If you are interested in getting one for yourself, you should look at the following best miter saw for crown molding that we’ve picked for you.

Top product comparison chart:

DEWALT 12-Inch Miter Saw, 15-Amp15 AMPCorded electric42.8 Pounds4000RPM
Metabo HPT 10-Inch Compound Miter Saw15 AMPElectric powered24.5 Pounds5000RPM
Makita 10″ Compound Miter Saw15 AMPCorded electric27.3 Lbs4600RPM
TACKLIFE 12-Inch Double Sliding Miter Saw-15 AMPCorded Electric53 Pounds3800 RPM
WEN MM1011 15-Amp 10″ Single Bevel Compact Sliding Compound Miter Saw15 AMPElectric Miter saw37.8 Pounds4500 RPM
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)Best high power Miter saw for crown moldingDewalt 12 inch miter saw
Metabo HPT 10-Inch Compound Miter Saw, Single BevelBest compound Miter saw for crown molding with single bevelMetabo HPT 10-Inch Compound Miter Saw
Makita 10″ Compound Miter SawBest compound Miter saw for crown moldingMakita 10 Compound Miter Saw
Compound Miter Saw, TACKLIFE 10-Inch Double Sliding Miter SawBest Miter saw for crown molding with double slidingCompound Miter Saw
WEN MM1011 15-Amp 10″ Single Bevel Compact Sliding Compound Miter Saw with LaserBest Miter saw for crown molding with laserWEN MM1011 15-Amp

1. DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

The first one on the list is a Miter saw from the Dewalt. When it comes to power tools, this company needs no introduction. They make high-quality products with long durability. Dewalt Miter saw for crown molding comes in the typical bright yellow colors, and it uses a cord to connect to a power source.

Technical details;

The Miter saw comes with a left-side slope and a minor right side to make the angle cuts. There is no saw sliding option included in this particular product. So it won’t be able to make the cross-cut bigger than the size of its saw. This Dewalt Miter Saw can speed up to about 4000 RPM, which is fast like really fast. The size of the blade is 12-inches.

This Dewalt saw is a corded electric device. It uses about 15-Amp of power to operate. The weight of the Miter saw is 42.8 pounds.


The beveling trigger is on the saw, and there are more than three positive stops at common angles, which will save your time. This saw comes with tall slides that keep the wood in place and you can do work peacefully.


  • This saw features a single beveling system, and this thing can go down left up to a 48-degree angle.
  • There are more than three positive positions while beveling to save your precious time.
  • The speed of the saw can go up to 4000 RPM.
  • This saw can cross-cutting 2×8 lumber at 90-degree, and at 45-degree it can slice 2×6 lumber.
  • There are high slides to keep your piece of wood in the right place.
  • There is a metal fence that allows you to place the wood at exactly 90-degree to the saw.


  • High slides
  • Machine fence
  • High beveling angle


  • No sliding saw option.

2. Metabo HPT 10-Inch Compound Miter Saw, Single Bevel

This Miter saw from Metabo HPT comes in a light green color. The unit is compact and solidly built. It is a compound Miter saw, which means that it can make angled cross-cuts and bevels. It can only bevel to the left side.

Technical details;

This Miter saw is electric power, and it is corded. It has a powerful motor of 15-Amp. The Metabo HPT Miter saw weighs about 24 pounds, and it can speed up to 5000 RPM. There is a 10-inch blade mounted on the saw.


The Miter saw allows high Miter and bevel angles. The table of the saw is quite large and provides you extra space to work. It covers the blade with a semi-transparent cover which provides safety for the hands. For precision, this saw comes with bevel stops. When it comes to user safety, the manufacturers have not made any compromise at all. The operating handle on the side of the saw for safe operation.


  • The Metabo HPT miter saw comes with a 10-inch saw.
  • This Miter saw has a single bevel system which allows it to make bevels up to 45-degree.
  • This product weighs about 24.2 pounds which makes it easy to maneuver around.
  • The angels are mentioned on the saw to make precise cuts.
  • There are positive steps that the thumb can reach for setting angles quickly.
  • The Miter angle can also reach from 0-degree to 52-degrees.
  • The blade speed of the saw is 5000 RPM.


  • Fast blade
  • Lightweight
  • Compact design


  • Only single bevel

3. Makita 10″ Compound Miter Saw

If you are looking for a precise and compact Miter, saw, you should look at this one. This Miter saw from Makita comes in a clean-looking design with a turquoise-colored handle. In reflective silver color, this product seems sharp. It is a powerful machine that can drive the saw quickly for smooth and clean cuts.

Technical details;

This is a lightweight Miter saw weighing only 27.3 pounds. The product is compact, and its dimensions are 20 x 10 x 21 inches. The product is electrical and uses a cord to connect to the power source. The size of the blade is 10-inches. The motor it uses is a 15 AMP direct drive one.

There is also a shaft lock that ensures easy blade changing. Some accessories come along with the saw to help you in the molding process. The saw has 9 favorable positions for angle adjustment.


You can make the cross-cuts to both rights and left direction, and it can bevel to the left side. There is no sliding saw the option, so you have a limited space to work. The saw table is solid, and there are slides on the side to keep the material you can cut in the right place. The machine’s weight is just 27.3 pounds so that you can maneuver around with much effort.


  •  This Miter saw is powerful, and the blade rotation speed can go up to 4600 RPM.
  • It uses a shaft lock to ensure safe blade changing.
  • This machine features a table made up of solid metal which means that it will be durable and will last.
  • The saw can bevel from 0-45 degrees and allows you to make bevels.
  • There are positive positions at the standard angles to save time.
  • The cross-cut capacity to the right is 52-degree, and to the left, it can make up to 48-degrees.
  • There are slide rails to keep the material in place.


  • Lightweight
  • Solid build
  • Compact


  • Angle adjustment can be a bit tricky.

4. Compound Miter Saw, TACKLIFE 10-Inch Double Sliding Miter Saw

This Miter saw from TackLife is nothing less than heaven for someone who wants all the features of a Miter saw. . And if you want to talk about the design, it looks premium. This comes with dual bevel-cutting and dual cross-cutting options.

Technical details

This is a compound Miter saw which comes with a 10-inch blade. It is an electric and corded Miter saw. There is a 15 Amp motor that is capable of rotating the blade to almost 3800 RPM.  A dust collection system collects almost two-third of the total dust produced during the operation—the dusk collection you can also increase by connecting a vacuum to the machine. The worktable of this Miter saw is very wide and provides a lot of space to work. It comes with a clamping system that provides extra safety while cutting.


There is also an option to slide the saw to make longer cuts. So if you want to work with wider pieces of material that generally you can not cut with a fixed saw, this product is best for you. This saw comes with a laser guide which allows you to make cuts with great accuracy. A base handle can change the angle of cutting


  • The most impressive feature of this Miter saw is its double bevel-cutting feature.
  • The saw of this product can slide horizontally, which means that you can make longer cuts.
  • The 10-inch blade cuts smoothly and powerfully.
  • For longer cuts, this thing has a laser guide.
  • To keep the workspace clean, a dust collection system pre-installed can collect almost 70% of the dust produced during the work.
  • There is a transparent protective cover on the blade for safe operation.
  • You can connect it to a vacuum via a vacuum port available on the Miter saw.


  • Double bevel-cutting
  • Laser guide
  • Greater cutting capacity


  • The black color gets a bit dusty.

5. WEN MM1011 15-Amp 10″ Single Bevel Compact Sliding Compound Miter Saw with Laser

If you are looking for something with a more extended cutting range, you should look at this product. This specific product comes in black and orange colors. It is capable of making cuts to the left and right. This unit provides only left-side bevel cutting. The blade has a carbide tip for extra strength and durability.

Technical details;

This saw has a single-bevel design. It is electric and corded. This thing weighs almost 37 pounds. It uses a 15-Amp motor to rotate a 10-inch blade at a speed of 4500 RPM.  There is an onboard level II laser that guides and illuminates the area of cutting. And to keep the air dust-free, it comes with a pre-installed dust bag. The side rails are there to keep the material in place while being cut. And they also make sure that you don’t get any angle wrong,


The saw has an excellent reach up to 12-inches, and it can cut through 3-½ -inches, thick boards. Over the worktable, you get a clamp assembly for safe operation.


  • The first feature that is worth mentioning here is the speed of the blade that this unit provides. It can rotate the blade up to 4500 RPM.
  • It has a single bevel system, and the saw tilts to an angle of 45-degrees to the left.
  •  The blade has a carbide tip, and it can cut through some of the woods’ toughest.
  • Two table extensions come alongside the unit to give some extra space to play around.
  • A dust bag is fitted on the unit to capture the dust during the operation.
  • A laser guide is mounted in the unit to guide during the extended cuts.


  • Fast blade
  • Extended table
  • Durable blade


  • Single bevel design

Buying guide;

There are many tools to make crown moldings. You can use hundreds of different techniques while making the moldings. And cutting them is not different. One of the most efficient ways to cut the crown moldings is by using a Miter saw.

So if you want to work efficiently and save time you should also use a Miter saw. But before you go further to get one for yourself, you should take a tour of our buying guide that will ultimately help you choose the best Miter saw for crown molding.

Types of a Miter saw;

A Miter saw that can cross-cut and make bevels at the same time is called a compound Miter saw. Depending upon the style, these compound Miter saws can be divided into the following three categories.

Single bevel Miter saw;

A single bevel Miter saw is the one that comes with an option to bevel only to the left. It can make cross-cuts to either side, but it is limited to a single side when making bevels. A single beveling Miter saw is usually cheaper than the double beveling ones

Double bevel Miter saw;

A double beveling miter saw is the one that can make a bevel to both sides. This saw comes in very handy, especially when working with crown moldings.

Sliding Miter saw;

A sliding compound Miter saw is the one that comes with a saw that can reach further than a fixed saw. The unit which comes with a sliding saw can have a single bevel and a double bevel system. This type of product is best for people who work with wider boards.

 The features of a Miter saw.

Once you have finalized the category of the Miter saw you want, the next thing you should be looking at is the features. The beveling, cross-cutting, and sliding saw are the three mani features, and these are discussed above.

 Power of the motor and speed of the blade

The power of the motor and the speed of the blade are directly linked together. If a saw has a powerful motor, it will rotate the blade faster. An engine with a power of 15 amps is ideal for a Miter saw, and the rotation speed of the blade can range from 3600 to 5000 RPM.

 Positive stops

Positive steps you can use to set the most common angles easily. These stops are super helpful in speeding up the work and also to set the precise angles. Not all the Miter saws have positive stops, so if a Miter saw has some, that a plus.

 Size of the blade

The most commonly used blade sizes are 8, 10, and 12-inches for a Miter saw. The choice of the blade size depends upon your work. If you work with thick boards, you should have a bigger blade, and if not, then a 10-inch or 8-inch one will work for you.

 Laser guide

The last feature we are going to talk about is the laser guide. It is not compulsory with every unit, but the Miter saw that a sliding option should have a laser guide mounted. It helps in making the long cuts precisely.

 Table extenders and slide rails.

This is an extra feature that comes in with a double bevel Miter saw. It helps hold the long pieces of material on board and gives you some extra space to work. And the slide rails are

used to keep the material being cut perpendicular to the saw.

 Dust Bags and vacuum port

Almost all the Miter saws come with pre-installed dust bags to hold the dust produced during the cutting. And the vacuum ports you can use to connect the unit with an external vacuum will deliver ideal results for you.


Just like any other power tools working with a Miter saw requires proper safety precautions. So we recommend buying safety glasses alongside your unit. Some of the products given in the list come with an optional pair of glasses. So you should buy one if you don’t have one already.


What is the best Miter saw for crown molding?

DWS 715 from the Dewalt is the best Miter saw for crown molding. What makes it best? It is a compound Miter saw which is designed to make cross-cuts and bevels. You get to choose from three different options available. A single bevel fixed saw one, a double bevel fixed saw one, and a dual bevel sliding option.

So it provides almost all the necessary options that you need during the making of crown moldings. There are plenty of more convenience and safety features in the tool, like positive positions for setting angles quickly and a covered saw for enhanced user safety. However, if you are looking for the best in the business, this is the one.

Can you cut crown molding with a single bevel Miter saw?

Yes, a single bevel Miter saw you can use to cut the crown molding. There are hundreds of different techniques that you can use to trim the crown moldings. But all of them provide the same final product. And a single bevel Miter saw allows you to work with almost all the necessary angles to make crown moldings.

Is a sliding Miter saw worth it?

The answer to this question depends upon your personal needs. To answer it correctly, we’ll assume two different scenarios. In the first scenario, you only work with the crown moldings that are no bigger than 10-inches then the sliding saw is worthless for you. But if you work with material broader than that, you should invest in a sliding Miter saw.

Can I use a 7-inch blade on a 10-inch Miter saw?

Yes, you can use a 7-inch blade in a 10-inch Miter saw. But using a 7-inch blade won’t be very efficient because the saw won’t get lower enough to cut through the wood completely. There are saw adjustment options available on many units. So it depends. If you are curious and want to use one, you can experiment on your own. And it might work for you.

What size Miter saw do I need for crown molding?

The most common sizes used for crown molding are 8-inch, 10-inch, and 12-inch Miter saw. Using a specific one depends upon your own needs. We recommend going for the 12-inch one because that will give you the most cross-cutting capacity while cutting the moldings.

Conclusion ;

When buying a product with many features, there is always a chance of going for the most hi-tech one. But the most important thing to realize is what you need. So in this post, we’ve tried to help you get the best Miter saw for crown molding that would also fit according to your needs, so you don’t have to spend extra for something you are not going to use.

Share on:

Oliver is a professional interior designer and part-time content writer of Top Tools lab. He always researches different types of improvement tools.

Leave a Comment